NDTS Gateway Installation

Gateway Installation

Prerequisites

• A Gateway UUID supplied by the NAN Repository administrator
• A Linux host (Ubuntu 20.04 or later recommended) reachable by all workstations
• TCP port 60195 open inbound from those workstations

Installation Steps

# Copy the .gz file to the gateway computer
tar xf data-transport-gateway-<version>.tar.gz
cd dtgateway-installer
sudo ./install.sh
# → You will be prompted only for the Gateway UUID

Firewall Note

Open port 60195 to each NDTS workstation; no other inbound ports are required.

Verifying the Service

sudo systemctl status data-transport-gateway      # should show “active (running)”
sudo systemctl start  data-transport-gateway      # start if not running

Updating the Gateway

# Run the same installer script from a newer package
cd dtgateway-installer
sudo ./install.sh             # auto-detects an existing install; no prompts

Follow the directions above for verifying the service after updating the Gateway to ensure that the service is running.

Uninstalling the Gateway

sudo ./uninstall.sh           # script is included inside every package

Rolling Back the Gateway

Obtain the desired older package and run its install.sh. Rolling back more than one or two versions is not recommended.

NDTS Gateway Configuration

The following are optional configuration values that can be specified in the /opt/nandt- gateway/gateway_configuration.json file. The file must adhere to proper JSON formatting:

Configuration Options

Option	Description	Default
log_file_path	Path to write the gateway log file	/opt/nandt-gateway/nan-gateway.log
logging_level	Minimum severity written to the log (fatal → debug)	info
logging_format	Python logging format string for each line	%(asctime)s %(levelname)s %(module)s [%(process)d]: %(message)s
base_output_path	Directory used for incoming experiment data	/opt/nandt-gateway/data/received
https_endpoint	HTTPS endpoint of the NDTS Receiver	https://receiver.usnan.org
retry_limit	Attempts to forward each dataset to the Receiver	5
retry_delay	Seconds to wait between retry attempts	300
rsync_username	SSH/rsync account on the Receiver	nandt
rsync_node	Node to which experiment files are rsync’d	receiver.usnan.org
request_queue_size	Outstanding daemon connections accepted before new ones are rejected. Increase this value if the gateway is rejecting requests from spectrometers evident in the workstation daemon log file showing network communication errors	50

Example JSON configuration file

{
  "log_file_path": "/opt/nandt-gateway/nan-gateway.log",
  "logging_level": "info",
  "logging_format": "%(asctime)s %(levelname)s %(module)s [%(process)d]: %(message)s",
  "base_output_path": "/opt/nandt-gateway/data/received",
  "https_endpoint": "https://receiver.usnan.org",
  "retry_limit": 5,
  "retry_delay": 300,
  "rsync_username": "nandt",
  "rsync_node": "receiver.usnan.org",
  "request_queue_size": 50
}

Logging Levels

Nothing below the set log level will be logged.

Level	Description	verbosity	default
fatal	Critical events only	very low
error	Problems that must be addressed for normal operation	low
warning	Unusual events that generally require no action	medium
info	Unusual or noteworthy events (recommended for production)	high	yes
debug	Detailed diagnostic messages useful for troubleshooting, but should not be left on for normal operation	extremely high

NDTS Gateway Components

All files reside under /opt/nandt-gateway unless noted. :contentReference[oaicite:1]{index=1}

• main.py – entry point for the Python service
• /etc/systemd/system/data-transport-gateway.service – systemd unit file
• nan-gateway.log – runtime log (path overridable via log_file_path)
• gateway_configuration.json – configuration described above
• data/
  • received/ – transient storage for incoming experiment data
  • retransmitter.pid – PID of the active retransmitter helper
  • users.dat – current user / sample / project list
  • user_checksum.dat – checksum that governs list refreshes

NDTS Gateway Components

The NDTS Gateway consists of several key components installed under /opt/nandt-gateway, unless otherwise noted. Each plays a specific role in data transfer, configuration, or monitoring.

Gateway component files and their functions

File or Directory	Description
main.py	Entry point for the gateway's Python-based service
/etc/systemd/system/data-transport-gateway.service	systemd unit file used to control the gateway service
nan-gateway.log	Runtime log file (location can be changed via log_file_path in config)
gateway_configuration.json	Gateway configuration file containing operational parameters
data/received/	Temporary storage location for incoming dataset files until data is successfully forwarded to the receiver
data/retransmitter.pid	Contains the PID of the process that is attempting to re-send data that previously failed to be sent to the receiver. This is used internally by the gateway software to manage retransmitting data
data/users.dat	Cached user/sample/project list pulled from the receiver
data/user_checksum.dat	Checksum file used to determine when the user list should be refreshed

NDTS Operation

• Experiment transfer – Workstation daemons connect on TCP 60195, announce a dataset, and stream it to received/. Successful transfers spawn a **Transmitter** process that forwards the data to the receiver; on success the local copy is deleted. :contentReference[oaicite:2]{index=2}
• Retransmit – At start-up and after each daemon heartbeat, a **Retransmitter** scans received/. If a dataset’s original retry window has expired, it launches a new Transmitter until delivery succeeds or the file is manually removed.
• Heartbeat forwarding – Every daemon heartbeat is wrapped with the gateway UUID, local and UTC timestamps, then sent to the receiver by a short-lived **Heartbeat Transmitter**.
• User list propagation – Every 15 s the gateway requests an updated list from the receiver; if the checksum differs it saves the new list to users.dat and serves it to workstations on demand.

---

NDTS Logging

Logging level is controlled by the "logging_level" key in gateway_configuration.json. Levels (high → low volume): fatal, error, warning, info, debug. Default is info. The log file path defaults to /opt/nandt-gateway/nan-gateway.log. :contentReference[oaicite:3]{index=3}

Example log excerpt:

2022-06-06 09:22:23,130 INFO main [61393]: Starting gateway retransmitter instance...
2022-06-06 09:22:23,132 INFO main [61393]: Starting gateway receiver network endpoint...
2022-06-06 09:23:12,829 INFO GatewayTransmitter [61512]: Heartbeat sent to https://receiver.usnan.org/heartbeat

:contentReference[oaicite:4]{index=4}